Smarter glass

Russell Shipton, marketing manager, ESG, explains why smart glass has come of age and why it has clearly got a bright future. The past 20 years has seen a dramatic increase in the use of glass as both an external... View Article

When scale, safety and style collide

For large scale, modern constructions, virtually anything is achievable in glass. Andrew Lake, Vetrotech UK general manager explains why selecting the right fire-rated glass system is therefore critical to the specifying process. From the dizzying heights of the Burj Khalifa... View Article

Aesthetics and functionality in glazing for historical buildings

Preservation efforts are primarily orientated towards maintaining historical structures and, if possible, cautious restoration. However, when material loss or irreparable damage threatens to halt the effort, alternative options need to be considered explains Ulrich Huber, Sales Manager EMEA, SCHOTT AG.... View Article

Legal Compliance for fire-resistant glazing

Steve Rice, director of technical affairs for the Glass and Glazing Federation (GGF), outlines the compliances and CE marking issues that impact all those responsible for making the glazing in a building fire-resistant. Making Insulating Glass Units (IGUs) with a fire-resistance characteristic... View Article

A study in glass

A landmark educational building featuring an innovative use of glazing has lit up a run-down part of the Spanish town of Torrelavega, writes Steve Menary. A mix of squares, circles and an innovative use of glazing has been used to create... View Article

kbb back at Birmingham

Celebrating an impressive 30 years, kbb Birmingham, the UK’s largest gathering of the world’s best kitchen, bedroom and bathroom brands, returns to the NEC, Birmingham from 6 – 9 March 2016. Since the recession, which caused many businesses in the... View Article

Modern design houses stories from deep time

The Jurassic Coast is getting its first dedicated fossil museum thanks to National Lottery Funding and one collector’s generosity, reports Steve Menary. Over the past four decades, Steve Etches has collected more than 2,200 fossils from along the area of... View Article

Y:Cube: Rogers’ return to the prefab home

Sir Richard Rogers’ innovative offsite housing concept has been held up as a potential solution to the housing crisis, providing compact and affordable flats for sites not normally suitable for development. Stephen Cousins reports. The UK housing crisis, that so... View Article

How to rapidly meet environmental standards

Jim Gowan, design manager at Actavo | Building Solutions, explains how to rapidly meet environmental standards using modern construction methods. He has worked in the offsite and modular sector for over ten years. Back in 1998, a government report ‘Rethinking... View Article

Alternative paints can tick all the boxes

What do you look for in a paint? Performance and aesthetics, for sure. But what about sustainability? Environmental and health benefits? Is it possible to tick all the boxes? Until relatively recently, the answer was no. But a new generation... View Article

Beating the UK climate with correct render choice

With severe weather events becoming more frequent in the UK, more detailed consideration of the type of materials we specify and their capability to withstand a climate that is so unpredictable is crucial. By Steven Keitley, general manager, Parex Render... View Article

Introducing Biosolar

Deciding between a green roof and photovoltaics (PV) has been a question faced by many industry professionals over recent years when designing a flat roof; however these two technologies are no longer mutually exclusive options with the introduction of biosolar... View Article

Specifying timber for your project’s exterior

Nick Taylor, managing director at Silva Timber discusses what to consider when specifying timber products including species, sustainability and finishing. Wood is natures most versatile and unique material. The fact that it has been used in building for hundreds, even... View Article

Making an entrance better by design

The debate of form and function has long been raging in architecture. Here we speak to Kaz Spiewakowski, managing director of GEZE UK, about whether aesthetics and function are mutually exclusive when it comes to making an entrance. Entrances and... View Article

Inclusive building design under the spotlight

By Kelvin Grimes, project manager for ‘away from home’ assisted accessible toilets at Clos-o-Mat. As a result of developments in the past couple of months alone, architects need to be even more aware of accessibility and inclusivity in their design... View Article

Blending fire safety with aesthetics

Steve Bond, customer support manager, fire products, at Pilkington United Kingdom Limited, explores how developments in glazing are enabling businesses to meet fire safety regulations without compromising on design or energy performance. Arguably the first consideration for architects, before aesthetics or... View Article