Delta Membrane Systems Limited, an innovator within the waterproofing industry is proud to be launching the new 695 Sump Pump Chambers, pushing the boundaries of what’s possible in sump pump applications.
With a unique design, impressive storage capacity, and exceptional durability, the 695 is the new generation of sump pump chambers suitable for ground and surface water collection.
Advantages of the 695 Sump Pump Chambers:
- New unique design
- Finite Element Analysis (FEA)
- Channel locators for ease of installation
- Cable duct height option
- Sealing lip
- Compatible with the Delta V3, V4 and V6 sump pumps
- Enables interchanging of V3, V4 & V6 pumps when site situations change from those planned
- Simply internal pipe work arrangement for ease of installation & servcing
- New slim lid able to withstand pedestrian traffic
New unique design
The Delta 695 chamber’s compact new size doesn’t compromise of capacity or durability. This specially designed sump chamber has many advantages over previous models. The versatility of the Delta 695 chamber is unmatched, it’s compatible with all Delta V3, V4 and V6 sump pumps.
Not forgetting the all-important cost savings, the Delta 695 chamber may be smaller in size, but has big benefits – less excavation costs, less labour costs, less waste disposal costs, less requirement for concrete/steel (when housed).
We understand the need for project specifics which is why the Delta 695 chambers are supplied with a preformed choice of height for cable duct/vent pipe.
Reducing Risk – we’ve added an external sealing lip to the 695 chambers. This sealing lip will allow installers to apply Delta AKTI-VO 201 (swellable mastic) to the entire external lip locator of chamber. Once the sump chamber is backfilled this seal will offer a continuous waterproofing approach.
If you need consistent, reliable performance the Delta 695 chamber will not disappoint. The Delta 695 chamber is fully compatible with the Delta V3, V4 and V6 submersible pumps. Saving on storage, handling costs and packaging whilst enabling installers to maximise on installation depths – as there is one standard size required for all.
The Delta 695 chamber has been designed to accommodate all varying pump heights of the Delta V3, V4 and V6 sump pumps. It is common for basements to be lower than mains drainage pipes and sewers serving the structure. Any drainage from a basement or below ground structure will need to be pumped up. The term “pumping height” “lift” is used to indicate the vertical height the pump is required to pump up.
The new Delta 695 chamber not only has a slimmer lid to previous models, it’s also able to withstand pedestrian traffic, mitigating any follow-on trade accidents.
To explore the new range of Delta Pumps, visit our website at www.deltamembranes.com
Whatever the needs of your project, you can rely on Delta’s Technical Team to ensure you get the right advice, support, and practical help at exactly the right time its required. Call us today on 01992 523 523 or email info(Replace this parenthesis with the @ sign)deltamembranes.com.