Harriet Keohane from Saige Premium Composite Products shares essential pointers for architects and designers specifying aluminium decking for new build or retrofit projects, to ensure the safety and functionality of outdoor spaces
There are key considerations when it comes to specifying decking such as fire safety regulations, product selection, installation and maintenance.
As the construction industry continues to grow and evolve, it is important for architects to keep up with the latest fire safety requirements for decking products. In particular, specifying aluminium decking for balconies and roof terraces in the UK requires a thorough understanding of the regulations to ensure the safety of the building and its occupants.
Fire safety standards for decking
With effect from 1 December 2022, the Building Regulations Approved Document B will extend the ban on combustible materials to further residential building constructions in England, thus enhancing fire safety standards. Among the principal changes that will impact the specification of B Class and A Class Decking products are the updated provisions for residential buildings that have a storey of 11 metres or more in height. Generally, B-class-rated products are acceptable for decking installed at 11 metres and below, whereas A-class decking must be used at 11 metres and above.
In the UK, fire-rated decking is classified based on its ability to withstand and resist the spread of fire. There are two main classifications of fire-rated decking: Class A and Class B. The primary difference between Class A and Class B fire-rated decking is their level of fire resistance. Class A fire-rated decking has the highest level of fire resistance and can withstand the most extreme fire conditions. It is designed to prevent the spread of fire and to reduce the risk of structural damage. This type of decking is typically aluminium, whereas Class B fire-rated decking has a lower level of fire resistance than Class A but still provides a significant degree of protection against fire. This type of decking is typically made of composite materials.
Aluminium decking is a popular choice among architects due to its durability, low maintenance, and aesthetic appeal. However, it is important to note that not all aluminium decking products are created equal when it comes to fire safety. Architects must be diligent in their research and selection of products to ensure compliance with the latest regulations and standards.
The first step in specifying aluminium decking for balconies and roof terraces is to understand the fire safety requirements within the UK Building Regulations. The Building Regulations Part B outlines the fire safety requirements for buildings in England and Wales, including those pertaining to decking products.
The regulations state that all decking products must have a minimum Euroclass rating of B-s1,d0 or Class B according to the BS EN 13501-1 standard. This means that the product must have a certain level of resistance to fire and produce minimal smoke and droplets when exposed to flames.
Architects should also consider the location of the decking within the building when specifying products. For example, if the decking is located on an upper floor or roof terrace, it may require additional fire safety measures such as fire barriers or sprinkler systems.
When selecting aluminium decking products, architects should look for those that have been tested and certified to meet the required fire safety standards. It is recommended to select products from reputable manufacturers who have a readily available resource section on their website with technical specification sheets, and BIM tools available for download.
It is also important to consider the installation of the decking and its potential impact on fire safety. Improper installation or the use of non-compliant materials during installation can compromise the fire safety of the decking and the building as a whole. Architects should work closely with an approved installer to ensure that all materials and methods used during installation meet the necessary fire safety requirements.
Design & functionality
Architects should also consider the overall design and functionality of the decking. Aluminium decking products come in a variety of styles and finishes, and can be customised to meet each project’s unique needs along with appropriate fire rated subframes and pedestals to ensure a fully specified and fire rated system. As a result of selecting a product that meets both the fire safety requirements and the aesthetic and functional needs of the project, architects can create a safe and visually appealing outdoor space for building occupants to enjoy.
One additional consideration for architects is the maintenance and upkeep of the decking. Regular maintenance and inspection can help identify potential fire hazards and ensure that the decking continues to meet the necessary fire safety standards over time. Architects should provide building owners with guidance on proper maintenance and inspection procedures to ensure that the decking remains safe and compliant.
In conclusion, specifying aluminium decking products for balconies and roof terraces in the UK requires a thorough understanding of the fire safety regulations and standards. Architects must ensure that the products they select meet the necessary fire safety requirements, are installed properly, and are designed to meet the unique needs of each project. By taking these factors into consideration, architects can create a safe and visually appealing outdoor space for building occupants to enjoy for years to come.
Harriet Keohane is director of Saige Premium Composite Products