New Kingspan tapered systems provide a slimmer insulated fall

Kingspan Insulation has introduced Kingspan Thermataper TT44-K and Thermataper TT47-K, its first tapered roofing systems to incorporate Kingspan Kooltherm insulation, delivering excellent drainage and thermal performance with slim, lightweight constructions.

Kingspan Thermataper TT44-K and Thermataper TT47-K are designed for use on new and existing roofs with concrete or timber decks. With a thermal conductivity of just 0.018 W/m.K, the Kingspan Kooltherm packer board helps to minimise the overall system thickness required to achieve a desired U-value. Typical thickness savings of 20 – 40 mm could be achieved, dependent on the individual scheme and build-up, when compared with a full Polyisocyanurate (PIR) system.

Kingspan Thermataper TT44-K and Thermataper TT47-K can provide an effective flat roof drainage solution without the need for a structural fall. Each application is supported by Kingspan’s specialist tapered roofing design service, providing a clear layout for installers which will allow the desired level of rainwater run-off and insulation performance to be achieved. The service also includes a full condensation risk analysis.

Unlike traditional alternatives, such as screed to fall, the systems can be fitted with a dry installation process – reducing project timescales. In retrofit application, they can often be installed above the existing roof surface in conjunction with a waterproof membrane. This can avoid the time-consuming process of stripping down the existing surface. Pre-mitred hip and valley boards are also supplied as part of Kingspan Thermataper systems, helping to reduce both on-site adjustments and waste from offcuts.

For further information, please contact:

Tel: +44 (0) 1544 387 384

Fax: +44 (0) 1544 387 484

email: literature(Replace this parenthesis with the @ sign)kingspaninsulation.co.uk

Website: www.kingspaninsulation.co.uk